The reducer is an important part of the mechanical transmission system, which changes the speed and output torque.
Now, the number of reducers can be seen in various machinery, transportation, construction, machinery and other fields. There are six main advantages of using reducer on motors
1. The use of reducer can effectively keep the motor
In operation, the reducer receives more torque. When overloaded, it is transmitted to the motor as long as the overload is divided by the deceleration ratio
2. Cost saving
When the overload is very large, the reducer will be damaged first, and the normal operation of the reducer can be restored only by replacing the spare parts. The cost is relatively low. If the direct damage of the motor is relatively slow, the cost is higher.
3. Effectively reduce the moment of inertia
The reducer can control start stop and speed change in time. After the reducer is increased, the torque is equivalent to the input power, which can reduce the power required by the input motor (where speed regulation is required). Generally, the motor is more expensive than the reducer, so consider using the reducer.
4. Can effectively save energy
The use of reducer can meet the requirements of motor output torque and current.
5. It can effectively reduce motor speed and increase torque
The reducer can output corresponding multiplication and reduction ratio according to the motor.
6. Effectively reduce the load inertia of the motor.
The numerical inertia is the square value of the deceleration ratio, and different motor inertia values are different.